DPY351

It is equipped with a 3.5" wide-angle display with high brightness that allows operation in any condition
Its Intuitive Human-Machine Interface (HMI ) is a clear and intuitive interface
Equipped with Ethernet Interface input, it allows configuration and monitoring of all devices connected to ADELbus using SNMP and Modbus TCP protocols
Up to 30 devices can be connected simultaneously

Monitor

It is possible to monitor incoming and outgoing data, current spikes, voltage spikes, all battery parameters such as temperature, charging status, internal impedance

Configure

With the DPY351, you can change the parameters of each of the ADELsystem devices: DC- Ups, Power Supplies and Battery Chargers

Alarm Management

All alarms in the ADELsystem device are immediately reported

Historical

The DPY351 allows you to check the history of the parameters that are recorded within each product

Storage

The device stores and displays the last 20 actions taken

Web Server

You can configure and manage the device directly from your Server

Event

Actions that are coordinated through connected devices can be programmed through system automation

The Heart of the System

The heart of the system: simple to mount, just a 90mm hole for all types of surfaces, born for heavy duty in a rugged IP67 body, allowing multiple units to be managed by remotely monitoring, configuring, storing and connecting. A unique device, the first that allows to enclose all functions inside for the use of ADELSystem devices at the highest levels of performance.

Ethernet Connection

DPY351has been developed to be able to connect to all new devices developed by ADELSystem. Through ADELBus (CANbus and ModBus) it is possible to establish the connection of configuration, reading, evolution of device data. Through the DPY351 it is then possible to create Events that are the result of an algorithm established by the DPY351 between the various interconnected devices.

Gateways and Protocols

HTTP Web Server for device configuration and management via Ethernet with dynamic or static IP
Modbus TCP/IP Ability to configure a set of default values. Allow unique identification of the unit in the network
SNMP v2c A list of parameters of connected devices is provided that can be viewed remotely or with SNMP. Each parameter (OID), is marked one by one to a Modbus RTU register
MQTT Allows the DPY351 to connect to the ADELView System Cloud for remote power monitoring of devices connected to the DPY using Modbus or CANbus